How to Install the Thinkware OBD-II Power Cable

The OBD-II Power Cable will allow the installation of a THINKWARE Dash Cam into any vehicle*. This kit was designed to simplify installation and ensure seamless integration for enabling the built-in Parking Surveillance Mode in your THINKWARE Dash Cam.

*Not compatible with select vehicles. Please click here for a complete list.

How to Install the Thinkware OBD-II Power Cable

1. Locate the OBD-II Port in your vehicle.

What Is OBDII? History of On-board Diagnostics (OBD) | Geotab

2. Plug the OBD-II Cable into the OBD-II Port.


3. Plug the Power Port into the Dash Cam.

4. Turn on the Vehicle's Ignition and ensure the Dash Cam powers on.

5. Enable Parking Mode.

6. Once enabled and your changes have been saved, turn off the vehicle's ignition. Wait until you hear "Parking Recording will now start."

7. Hide the Dash Cam Cables.

You have successfully installed the Thinkware OBD-II Power Cable!





Was this article helpful?

0 out of 0 found this helpful

Have more questions? Submit a request



Please sign in to leave a comment.