Initializing ADAS

What is the Initialize ADAS Setting?

The ADAS (Advanced Driver Assistance System) is a road safety warning system that helps the driver with sound notifications while driving.

The Initialize ADAS Button begins calibration for the alerts to the view of the Dash Cam.

The Initialize Process is done while the device is in Continuous Mode (Ignition On). For the best calibration, it's recommended to be in motion after beginning to calibrate. 

*Please do not drive and use the Thinkware Dashcam Link App

This process takes a few minutes, and you should begin to hear all the enabled alerts shortly afterward where applicable.

Ensure you have enabled your preferred ADAS Alerts such as Lane Departure Warning, Forward Collision Warning, and Front Vehicle Departure Warning

Compatible Dashcams

  • Applicable for the U3000, Q1000, U1000, Q800PRO, F800PRO, F800 and F790
  • Applicable when paired with the GPS Accessory; F200PRO, X1000, X700, X800

1. Connect to the Dash Cam via Wi-Fi or Bluetooth

2. Select Dash Cam Settings > Road Safety Settings

3. Tap the Initialize ADAS Button

4. Select the back arrow in the top-left to save your changes.

5. The Dash Cam will now begin calibrating the ADAS alerts.

Note: 

  • The settings vary depending on the dash cam model
  • Please wait approximately 5 minutes before the alerts will sound

 

Was this article helpful?

0 out of 0 found this helpful

Have more questions? Submit a request

Comments

0 comments

Please sign in to leave a comment.