Selecting the Parking Mode
To enable the dashcams Parking Mode, you are required to have your DashCam hardwired.
For information on ways to power your Thinkware Dash Cam, click here.
Enabling the Parking Mode allows your dashcam to continue to record videos when the ignition is off.
Initiates a recording when there is motion present in front of a camera lens or impact to the vehicle.
Motion Detection mode records 10 seconds before the Motion/Impact up until 10 seconds after (20-second clip).
[X700, X550,] TimeLapse
Records 2 frames per second (10 minute period condensed into a 2-minute video clip), provides you a continuous parking surveillance recording.
Records Impacts (50 seconds before impact, up until 50 seconds after)
Does not record Audio
How to Enable the Parking Mode Setting;
Follow the instructions below to enable the parking mode setting;
1. Select the Main Menu
2. Select Dash Cam Settings
3. Select Record Settings
4. Under Use Park Mode Select the Parking Mode
5. Tap the back arrow in the top-left to save your changes.