How to use the Mac Viewer

What is the Mac Viewer?

The Mac Viewer is the Thinkware software program for Mac Computers used to review footage, get information such as speed, location, and time, and change your dash cam settings. 

To Download the Mac Viewer, click here.

How to use the Mac Viewer

1. Remove the MicroSD Card from the Dash Cam.

THINKWARE-F200-PRO-Full-HD-1080P-WiFi-Dash-Cam-fig-6.png

2. Insert the MicroSD into the included Transflash adapter or USB Reader. 

USB-Micro-SD-Card-Reader.jpg3.png

3. Insert the Transflash adapter or USB Reader into your PC Computer.

Remove-Write-Protection-From-SD-Card-Android-2.webp

4. Once the SD Card is connected to your Mac Computer, launch the Mac Viewer.

*If you are unable to open the Mac Viewer, please click here.

5. The diagram below shows you how to use the functions of the Mac Viewer.

Screen_Shot_2020-04-02_at_11.26.04_AM.png

How to Import Video Files

When opening the Mac Viewer, the video files will not automatically import. Please follow the steps below to import the video files.

1. Select  folder.svg  

2. Select the MicroSD Card from the left-side panel in the finder. The videos will now import.

Screen_Shot_2020-04-02_at_1.12.26_PM.png

If you have any questions or concerns regarding the Mac Viewer, please reach out to our team at support@thinkware.com or 1-844-865-9273.

 

 

 

 

Was this article helpful?

1 out of 1 found this helpful

Have more questions? Submit a request

Comments

0 comments

Please sign in to leave a comment.